1951 Chevy Accessories Installation Manual

tmp5BD-1.jpg
Figure 68
986538 TRUNK GUARD
Procedure for Installation of Trunk Guard on All Model Passenger Cars.
1.    Place cross bar opening on the two rear bumper guards and push cross bar towards front of car, until cross bar openings are over bumper guards.
2.    Place cross bar clamps on bumper guards and use two cap screws and lock washers furnished on each bumper guard to hold cross bar clamp in place and tighten securely, (see figure 71),
tmp5BD-2.jpg
Figure 69
Approximate Flat Rate Time .3 of an hour,
tmp5BD-3.jpg
Figure 70
26