switch terminal marked "TAIL" to the
light switch terminal marked "TAIL LAMP". Place #16 natural with black tracer
from terminal marked "BATTERY" on fog lamp switch to battery terminal on rear of
light switch as shown in figure 119.
aiming instructions are the same as for passenger car, see page 46, figure 115.
After aiming lamps, tighten
Approximate Flat Rate Time 1
986408-986409 BACK-UP LAMPS
Procedure for Installation of
Back-Up Lamps on All Model Passenger
1. Mount two spacers on housing above
steering column and
tighten securely as shown in
2. Mount switch on two spacers with switch
arm on same side as reverse