1951 Chevy Accessories Installation Manual

3.    Lift rubber weatherstrip on inside of door, to allow mirror bracket to mount to door edge.
4.    Insert clamp and with fiber pad in place between diecast base and outside of door (to protect finish), tighten screws securely and replace weatherstrip as shown in figure 139.
Approximate Flat Rate Time .1 of an hour.
986441 REAR VIEW MIRROR BRACKET -TRUCK
Procedure for Installation of
Rear View Mirror Bracket
on All Model Trucks.
template on outside of cowl on the right-hand side of the body, lining up with body contour as indicated. Center punch and drill two 11/32 inch holes.
2. Attach brackets as shown in figure 141. Do not tighten nuts until extension mirror is assembled in brackets.
tmp627-1.jpg
tmp627-2.jpg
Figure 142
3.    Assemble extension mirror in brackets us­ing stud, lock washers and nuts furnished as shown in figure 142.
4.    Tighten all nuts and adjust mirror to suit.
5.    For Left-Hand Installation: Remove existing mirror bracket and use existing holes in cowl.
Approximate Flat Rate Time .2 of an hour.
Figure 140 1. For Right Hand Installation. Locate drilling
986533 LEFT-HAND DOOR TOP OUTSIDE MIRROR
tmp627-3.jpg
Figure 141
59