1951 Chevy Accessories Installation Manual

tmp719-1.jpg
1.    Drill 1/4 inch hole in moulding and door, (see figure 141) hole to be in line with rear edge of division channel, (see figure 141). When drilling 1/4 hole start drill 90 degrees from surface of moulding and drill through moulding. Drop drill to lower position and drill through door flange.
2.    Insert wedge between rubber door seal and door. Insert screw through wedge, door and moulding. Tighten screw into mirror base, (see figure 144).
3.    Adjust angle of mirror to suit.
Procedure for Installing Door Top Outside
Mirror on Special Model Passenger Cars.
986533 Left-Hand Door Top Outside Mirror
1. Remove flat head screw and rear view mir­ror base from mirror assembly, (see figure 145).
Figure 143
Procedure for Installing Door Top Outside Mirror on Deluxe Model Passenger Cars.
tmp719-2.jpg
Figure 144
60