1951 Chevy Accessories Installation Manual

Figure 225
12.  Fill jar with clean water up to the lever line as indicated. Do not use a dirty or greasy container or pour water through a dirty funnel, as dirt or small particles will clog jets.
13.  Remove plugs and flush out tubes by turn­ing water. See that all fittings and tubes are tight and that tubes are connected to the proper outlets.
14.  Insert Jets into windshield wiper housing. Aim jets so that stream strikes glass at upper wiper arc five inches from windshield division strip, as shown in figures 226 and 227.
Figure 227
Figure 226 92