CORVETTE PEOPLE

Bill Mitchell: Head of General Motors Design Staff

Carl Renner: A Chevrolet designer who is believed to have had a significant influence on the the design of the 1953 Corvette and the solid-axle Corvettes to follow.

Chip Miller: A brief look at Chip Miller, one of the key organizers of the Corvettes at Carlisle event.

David C. Hill: Corvette Chief Engineer and Vehicle Line Executive from 1992 to 2006.

David R. McLellan: Corvette Chief Engineer from 1975 to 1992

Harley Earl: The "Father" of the Corvette.

John Cafaro: John Cafaro and the C5 Corvette: It was all by design.

Larry Shinoda: Corvette Designer most known for the design of the 1963 "split-window" coupe.

Myron Scott: The man responsible for naming the Corvette.

Noland Adams: Noland Adams - He Wrote the Book on Corvette Restoration

Will Cooksey: Willmer Cooksey, Jr., Bowling Green Corvette Assembly Plant Manager

Zora Arkus-Duntov: The "Godfather" and first Chief Engineer of the Corvette.

Zora's Letter: This is the letter by Zora that saved the Corvette from being discontinued!

Noland Adams - He Wrote the Book on Corvette Restoration

Corvette author and historian, Noland Adams not only wrote the book on Corvette restoration, he lived it. When the marque was still in its infancy, Adams owned the very models he would some day write about in such copious detail' when the notion of restoration was just beginning to catch on, Adams joined the National Corvette Restorers society as one of its earliest members and officers, writing articles for its Corvette Restorer publication' and when the need for a comprehensive guide became apparent, Adams spent years researching and writing The Complete Corvette Restoration and Technical Guide Vol 1 (1953 - 1962) and Vol. 2 (1963 - 1967).

The lasting legacy of Noland Adams, however, will likely be the promotion of the Corvette hobby and devotion to meticulous restoration. Adam's interest in restoration was sparked in 1969 when he tracked down the '53 Corvette he had traded for a Chevy sedan eight years earlier. Recalls Adams, "It hadn't been on the road since 1965, and it sat in the back yard for four years, full of water, with parts all over the yard and garage. I bought that old Corvette and the heap of worn-out parts for $700.

"I started restoring the Corvette slowly and carefully. I would remove a part or two and begin repair/restoration. But as long as I had one section out, it was easy to get to the next part." As the pieces mounted, Adams lost track, and "so I did the only reasonable thing: I put them all in a big box."

Looking for help on the project, Adams joined the local Corvette club and then the NCRS. "Those were tough days," says Adams, "when information was really hard to locate. I went to all of the NCRS meetings I could and took notes about all of the questions that were asked—and how there were very few answers."

No authoritative guide was available, and when L. Scott Bailey of Automobile Quarterly contacted Adams in the Fall of 1974 about writing one himself, the novice author accepted the challenge.

For six years, Adams spent evenings, weekends and vacations travelling, researching and writing the first volume of his technical guide while he worked at his day job. His first marriage ended four years into the project. Friends would teasingly ask how the book was coming along. But Adams persevered, and in 1980, he had the satisfaction of signing the first edition of his book. It would take another six years to prepare the bulk of his second volume which, due to delays at AQ ,would not be published until 1988.

Along the way, Adams gained unprecedented access to GM's files, unearthing information that, according to the author, "we had been told over and over that it no longer existed!"

Adams recently described his researching methods. "Through many contacts (many started with friends in NCRS), I gained access to many 'hidden' records within Chevrolet. I found there were two ways to get information: 1) Make a direct request through Chevrolet Public Relations. 2) Go in a side door with a friend. I used both methods. While Chevy PR was helpful, they did not have the personnel to do research for me. I used my side door approach to locate the files and information I wanted. Once I new where it was, I requested copies."

Adams has spent his retirement applying the same intensive researching techniques to his American Legend histories. He has written hundreds of articles for the Corvette press, hosted a videotape series, and has made presentations on Corvette restoration throughout the United States as well as Canada, Sweden and England.

© 2011 High Performance Web Sites. All Rights Reserved

Contents

Home
History
Year by Year
Prototypes
Pace Cars
Specials
People
Links

Other HRDU Sites

Hot Rod Events
Hot Rod History
Hot Rod Hall of Fame
Hot Rod Magazines
Hot Rod Books
Hot Rod Tech
Hot Rod Tours
Kustoms
Memorabilia
Show Rods
Land Speed Australia
Land Speed America
LSR History
LSR Historians

More HRDU Sites

All About 1934 Chev's
48-53 Chev Pickup's
History of the Corvette
Prototypes
Car Spotters Guide
Monaro Shrine
Aussie Utes
Wheelstanders
Scallops
Slopers

About

About Hot Rods Down Under
Contact Us
Copyright
Disclaimer
Terms and Conditions
Privacy
Site Map

Hot Rods Down Under
Movies
Music
TV
Calendar
Links
Home