For the 1966 Corvette, the big-block V-8 came in two forms: 390 bhp on 10.25:1 compression, and 425 bhp via 11:1 compression, larger intake valves, a bigger Holley four-barrel carburetor on an aluminum manifold, mechanical lifters, and four- instead of two-hole main bearing caps. Though it had no more horsepower than the previous high-compression 396, the 427 packed a lot more torque -- 460 pound/feet vs. 415. Of course, engine outputs were sometimes deliberately understated in the Sixties so as not to arouse the ire (and, subsequently the rates) of insurance companies. Here, 420 and 450 bhp would be closer to the truth.

Ordering a 427 Corvette meant you had to take it with Positraction and the close-ratio Muncie four-speed; there was no other choice. You also got an upgraded suspension, basically the same as the 396 package, as well as stouter, shot-peened halfshafts and U-joints and a higher-capacity radiator and sump.

Regardless of which axle ratio it turned, the 427 Sting Ray was an astonishing executor. With the short 4.11:1 gearing, 0-60 mph times were recorded in a nearly unbelievable 4.8 seconds, and 0-100 mph in 11.2 seconds, with a blistering top speed of 140 mph. The modest 3.36:1 ratio made things only a bit less sensational: Car and Driver reported 0-60 in 5.4 seconds and a standing quarter of 12.8 seconds at 112 mph.

With big-block V-8s being the order of the day, there was less demand for the 327, so small-block offerings were cut from five to two for 1966, and only the basic 300- and 350-bhp versions were retained. Arguably, these were still the best all-around engines. Both required premium fuel on compression ratios well over 10.0:1, and they didn't have the rocket-like thrust of the 427s, but their performance was impressive all the same. As before, both could be teamed with the Powerglide automatic, the standard three-speed manual, or either four-speed option.

Engine choices aside, the 1966 model year dawned quietly for the Sting Ray. Its frontal appearance was mildly altered with an eggcrate grille insert to replace the previous horizontal bars, and the coupe lost its roof-mounted extractor vents, which had proven inefficient. This relative lack of change reflected plans to bring out an all-new Corvette for 1967. It certainly did not reflect a fall-off in the car's popularity, however. In fact, 1966 would prove another record-busting year, with volume rising to 27,720 units, up some 4200 over 1965's 23,562 sales.

1966 Corvette Specifications

The 1966 Corvette Sting Ray offered a bigger big-block option, as the 396 became a 427 offering 390 bhp or a stout 425, versus 350 for the year's top 327. Here are the specifications for the 1966 Corvette Sting Ray:

Mechanical Specifications (2-door convertible/coupe)

Suspension
front:Independent; upper and lower A-arms, coil springs, antiroll bar, tubular hydraulic shock absorbers
rear: Fixed differential, U-jointed half shafts, lateral struts, radius rods, transverse leaf spring, tubular hydraulic shock absorbers, antiroll bar w/big block engines

Wheels/Tires
7.75x15

Brakes
front: 11.75-inch disc
rear: 11.75-inch disc

Transmission
3-speed manual (std)
4-speed manual (opt)
2-speed Powerglide (opt)

Standard axle ratio
3.55:1

Engine Specifications

Published Performance Numbers

Vehicle Production and Base Prices

Options and Production

Color Choices and Production